Shapeoko disconnecting

[wb9tpg (Gary Mitchell)]

@ctdodge

Are there any other suggestions for keeping the machine alive during a cut?

Put ferrite beads on everything you can. It’s only $9 too.

Went Ferrite Crazy Today and other ramblings

Bought a assortment of Ferrite Beads for $9 and went crazy applying them to the CNC today. Put one on each limit switch, IoT relay, Router and Zero Probe. Ran my precision pattern test on the HDZ and saw it cutting 0.3mm deeper than requested. After some head scratching I measured the Carbide3D zero probe and found it 24.7mm thick instead of the 25mm I entered into UGS. There’s my 0.3mm error. Initially I thought “Lead screws can’t stretch can they?” LOL [IMG_1758] [IMG_1759]