STL files and Carbide Create Pro Issue

[WillAdams (William Adams (Carbide 3D))]

Note that as shown at:

Importing a 3D file from Shapr3D to Carbide Create Pro

This shape can be easily made in Carbide Create Pro w/o a 3rd party program: [image] [image] [image] Apply [image] Show 3D [image] If you make it in some 3rd party program and then export as an STL and then import: https://carbide3d.com/hub/courses/create-pro/3d-tool-import-stl/ it should be much the same.

it is possible to restore any trimmed away height using the “Base Height” feature.