This is on my list of things to do. I’ve bought aluminium t-track and was going to route slots out and bolt them to the MDF - I’m not sure cutting t-tracks into wood would work well, woodwork wise.
The stock board for the nomad has not been very useful in my experience. The aluminium plate on the machine itself is… well… mostly useless by itself. I bought the screwed aluminium table and have used that since, but the hole placements are not ideal for me since I always home to the centre… with stock that is multiples of 25mm/1" I always find the nearest hole is half-covered or an inch away.
So I’m hoping for a t-track/screwed hybrid but haven’t had time to make one as yet.