Note: I ordered my HDZ with the proximity switches and this works with the Z proximity switch. I don’t know if it works the same with the standard Z limit switch, which is what I believe you get if you don’t order the proximity switches.
You lose the additional travel that you would’ve gained by using the HDZ and an alternative sender. With the bracket it’s the same as stock.
See below. I laser cut these at my regular job. The top image is the bracket powder coated & installed; the bottom image is raw & loose.
In the Beaver CNC community section, somebody made a 3D printed bracket with a nut on the top. You just need metal up there for the proximity switch - you could rig up something pretty janky and as long as there’s metal up there, it would work.
