I started using Pro Build 464. When creating the tool path it shows that time to generate is under 2 minutes. When I run the simulation it looks incorrect. Any ideas what to do to trouble shoot.
Thanks
John
I changed the model resolution to standard. The file was originally 7420 mbytes. After the zip 5181 mbytes. The message too large sill coming up. when I tried to upload it
How large is the G-code file that you generated that showed up as “2min” for cut time ?
Difficult to tell what’s going on without having a look at the file though, to you have an alternate way to provide the file (put it on a Google drive or other file sharing site?)
How long does the toolpath calculation itself take ?
I wonder if CC chokes on the size of the input data.
Gcode Horse.nc (3.8 KB) It runs real quick now that I made the resolution standard. I attached the Gcode file. Maybe you can run it to see what I’m talking about. In the mean time I will look into another way of getting this file to you.
Unfortunately, increasing the thickness too much crashes Carbide Create.
Please update to the current beta, then try re-creating the file with a stock thickness which matches the depth/height of the modeling which you do — let us know how that works out.