Using thread locker on my sweepy

[Jean (Jean D.)]

Hi David,
I had this issue myself and I located this fix using a printable lock. I used it and works great! Hope this helps.

Jean
See the link:

Introducing the Carbide 3D Print Library

Another mod which conceptually is super simple that I’ve been trying out lately and so far so good. It’s a bolt lock for the sweepy screws and once properly adjusted pretty much keeps them in place and stops them from becoming loose overtime and having sweepy slide out of position. Basically you need to clock the screws in the correct alignment and this cap/lock is friction fit onto the bolt heads and the hex inside is what locks the bolts in place. Sweepy Bolt Lock.stl (69.0 KB) [image] […