I set 90 Vee bit in new Vee library on CC451. Question when setting depth is that the deepest the vee bit will go, or is it per pass? I know on the End mills it’s per pass. Thanks for any input.
CC doesn’t have an option to depth limit, see:
Ok The Vee setting on new 451 library has a depth setting what is it used for.I have some deep cuts and want to Vee bit to not make it in one cut. Or how would one do this? Thanks for any input.
Vee endmills may have a depth per pass setting as part of the tool definition for a given material. So long as this is less than needs to be cut, multiple passes will be made.
Great! I am Learning more every week. Thank you