Worked out how to make small box joints

[WillAdams (William Adams (Carbide 3D))]

EDIT: Commercial

third-party software isn’t necessary, see:

CNC Box (Finger) Joint Box

Working up a tutorial on this for the wiki: but is now at: First step is to create the box itself: This is done in OpenSCAD using the parameters: length = 6; width = 3; height = 4; thickness = 0.375; bottomlidthickness=0.125; pins=13; partspacing=2; Next resolve the pin/joint size and spacing: [cnc_box_fingerjoint] Next step is to work out how to get from the above parameters to a file which may be easily cut using Carbide Create — probably using METAPOST.

and

Box (Finger) Joints