How to import Carbide 3d tool library into fusion 360

Okay. It took me a minute to figure out how to share my Fusion tool library. I had to upload it to the 360 Cloud drive (because the forum here won’t let you share .json or .tools files). Hopefully this link works; it is to the .json tool file.
http://a360.co/2srKCyO

Here is also a picture of my quick and dirty end mill / collet holder, made out of scrap white pine. I also used it to practice holding things down with a pneumatic finish nailer, to test that out. That is why there are nail holes in it. Also, for the 1/8" shank mills, most of those are just stuck there for now since I have spares. They aren’t necessarily in their final numbered spots.

2 Likes