Carbide cutters data for Fusion 360

[WillAdams (William Adams (Carbide 3D))]

See:

Tool libraries for Autodesk Fusion 360?

Because I teach on the Shapeoko and Fusion in a public setting, I am very interested in having the Carbide 3D tools ready to import. Considering Fusion stores these as JSON, it makes sense to me to use Github to work towards standardizing Carbide 3D’s tool library. I quickly put together a repository based on Winston’s library that can serve as a starting point. If someone from Carbide 3D would like to be the maintainer of the repo, that would be ideal, but I’ll try to keep up with it until th…

How to import Carbide 3d tool library into fusion 360

Okay. It took me a minute to figure out how to share my Fusion tool library. I had to upload it to the 360 Cloud drive (because the forum here won’t let you share .json or .tools files). Hopefully this link works; it is to the .json tool file. http://a360.co/2srKCyO Here is also a picture of my quick and dirty end mill / collet holder, made out of scrap white pine. I also used it to practice holding things down with a pneumatic finish nailer, to test that out. That is why there are nail h…

Tool libraries for Autodesk Fusion 360?

C3D Tools.zip (2.1 KB) This is the tool library I made and sent to a couple people. Feeds and speeds are not specialized for any material, but the tool info is mostly there…

Keyseat cutter from Harvey Tools on the SO3

Here’s the link to the tool libraries for Fusion 360: https://www.harveyperformance.com/partners/autodesk-fusion-360/

Tool libraries for Autodesk Fusion 360?

C3D Tools.zip (2.1 KB) This is the tool library I made and sent to a couple people. Feeds and speeds are not specialized for any material, but the tool info is mostly there…

and esp.

http://www.winstonmoy.com/2017/11/carbide3d-tool-library-fusion-360/

and some vendors have pages:

https://www.amanatool.com/view-amana-tool-fusion-360-library

https://www.toolstoday.com/t-cnc-software-library