1/2" polycarbonate smooth edge

[neilferreri (Neil Ferreri Ω)]

I love the tape method on polycarbonate because it’s so easy to line correctly when you can see through the material.
Also, I knew this had come up before.

Polycarbonate (Lexan) Advice

@Biologyben Fast and shallow with a cheap 1/8" single flute. [PXL_20200913_050333280] 2500mm/min 1.5mm DOC Fusion Bore & 2D contour Had a communication buffer issue in the top curve…think I tracked it to a chord tolerance setting that somehow got changed to .001mm . Otherwise, smooth and easy.