RetiredLeo
(Frank Byrnes)
October 31, 2024, 3:34pm
1
I am using CCV7. I have been trying ti insert a traced image into a flag image. I cant get the complete design. Would someone please tell me what I am doing wrong. This is the best I come up with.
WillAdams
(William Adams (Carbide 3D))
October 31, 2024, 3:40pm
2
Please see:
as requested on support…
Given a design:
[image]
we need to offset it to the outside using Offset Vectors:
[image]
Apply
[image]
Then shift-click on the outer geometry to remove it from the selection:
[image]
and delete it:
[image]
Selecting the stripes:
[image]
we see that there are seven vectors, so we ungroup them:
[image]
Select the outer geometry:
[image]
copy it, move the cursor out of the drawing area, then paste it six times to make a total of 7 instances all sta…
if you’re still stuck, upload your .c2d file and we will walk through this with you.
RetiredLeo
(Frank Byrnes)
October 31, 2024, 4:38pm
3
Thank you Will. I appreciate the help. I got it with your help!
system
(system)
Closed
November 30, 2024, 3:34pm
4
This topic was automatically closed after 30 days. New replies are no longer allowed.