Adaptor for Dewalt Portable Vacuum to Sweepy 2.0

[mr.petravic (Robin Petravic)]

I bought a Dewalt 4 Gallon portable vacuum (its a DXV04T) to use on my router and the hose is not fitting my Sweepy 2.0 dust boot adapters. The adapter has an OD of 1.620" while the hose has a 1.570" ID. Anyone else found themselves in the same situation and have any suggestions for another adapter to go between them or a hose that i can replace the std hose with?

[WillAdams (William Adams (Carbide 3D))]

Make your own?

Making vacuum hose adapters

While cutting up vacuum extension wands for this is expedient, it’s a bit problematic given that Shop Vac recently filed for bankruptcy, was bought at the last minute, and production hasn’t caught up. I need a receptacle for the Sweepy 2.0 dust fitting — one option would be to purchase one from Woodcraft, but Carbide 3D sells blocks of HDPE: which looks to be just barely big enough for things to fit. Measuring the hose fitting I get a diameter of ~63.5mm — offsetting that twice we arrive at…

[spetsdod (Sean Pendergrast)]

I bought this, or something like this, to work between my DeWalt DXV08SA shop vac and the Sweepy 2.0 dust boot. I took off the ring strap on the smaller part, and it fit perfectly in the dust adapter. The end of the hose from the shop vac was a little loose so I just clamped it down with the hose clamp.

https://www.lowes.com/pd/Fernco-1-1-4-in-x-1-1-4-in-x-1-1-2-in-dia-Coupling-PVC-Fitting/1000075247

edit: found my receipt. here is the actual one I bought for my CNC.
https://www.lowes.com/pd/Fernco-1-1-2-in-x-1-1-2-in-x-2-26-in-dia-Coupling-PVC-Fitting/1000075239

Maybe something like that would work? Found this in the plumbing section at Lowes.