Annoying User Question (part 1): How to setup 3D carving in CC-P

[WillAdams (William Adams (Carbide 3D))]

Please see:

Instructions on How To 3D Carve using CC V7 Pro

First, configure the stock: [image] Draw in the geometry for the bowl and place as desired: [image] Inset by the desired width of the rim of the bowl: [image] [image] Offset to the outside of the bowl by endmill diameter plus 10%: [image] [image] Draw in geometry to define the stock (since we’ll be working subtractively): [image] Go to the 3D model tab and model the stock: [image] Select the geometry for the inner curve of the bowl and model it: [image] [image] Then im…

if you’re still stuck, e-mail the file in to projects@carbide3d.com and we’ll do our best to assist.