@baricl I just posted plans on the enclosure I made on my Shapeoko for my new Atomstack X7:
Your X30 is the same size, so might be a good starting point if you decide you need something 
My main concern was the smoke, even with the garage open, it made everything smell like a campfire. This contains it well and vents it outside nicely. If you use these plan, move the cutout for the vent up about 4 inches. It doesn’t hit the laser frame, but it might be blocking some airflow.
Also recommend getting a 10x15mm drag chain for the left side wires, mine intermittently bend on to the cutting area and have messed up cuts:
https://www.amazon.com/gp/product/B09M7YB7MT/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
And this is the best price I found on a honeycomb that will fit the full cutting area:
https://www.amazon.com/gp/product/B0BJ1YQ38M/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Good luck with your new toy, I’m jealous of the power compared to my X7 - lol