BitZero 1 with Carbide Motion

[rdaughdril (Robert Daughdril)]

Updating my Shapeoko XXL with a BitZero 1. Will this work with the newest version of Carbide Motion vs 667?

Thanks for the help.

Rob

[WillAdams (William Adams (Carbide 3D))]

Yes, so long as you choose the v1 option, see:

Using/verifying the BitZero

Here is how I check out the functionality of the machine/BitZero: first check that you have sent the correct Z-axis configuration This can be easily done by jogging down to the wasteboard surface, setting zero, then using the Rapid Position command to lift 6mm above the current zero — measure how much the machine moved — if it’s wrong: open the Log Window go to the MDI (EDIT: Note that it will need to be enabled in options in current versions) and send $$ and check that the Z-axis steps/mm …