Broken - does the Shapeoko 5 Pro 2x2' CNC actually have 24x24 of usable space?

[WillAdams (William Adams (Carbide 3D))]

Note it however you want, then enter the two dimensions into Carbide Create.

See:

Setting zero to center of stock by probing corners

Given the need to set the origin at the center of stock: [image] We probe to set the origin at the Lower Left corner: [image] click on “Position” to toggle to “Machine Position”: [image] and make note of the XY coordinates: X: -716 Y: -305.88 Then probe the opposite corner: [image] and get its Machine Position: [image] X: -317.80 Y: -6.113 and do the math, or just draw up the rectangle and set it to the correct position: [image] then copy-paste and repeat for the other cor…