Carbide Create PRO tutorials

[BigSte (Steven Lacy)]

I’m looking for recent Carbide Create Pro tutorials, specifically ones geared toward making trays with angled/sloped sidewalls. I just downloaded CC Pro and can’t seem to wrap my head around how to make a tray with sides that gradually slope from the side wall down to the bottom of the tray. Seems like the most recent CC Pro YouTube vids are not really current and I definitely can’t find one specific to what I’m trying to do. Any help would be much appreciated!

[WillAdams (William Adams (Carbide 3D))]

See:

Using gradient graphics to model angles/inclines/ramps in Carbide Create Pro

The usual approach for making angles in Carbide Create Pro requires a large stock area, and oversize geometry which does not match the part being modeled (at least at first). An alternate option is to use a pixel image with a gradient as shown at: Here are 4 gradient files: gradients_2000x2000.zip (12.8 KB)

If you would provide a sketch and dimensions we will gladly walk through this with you.