WillAdams
April 2, 2025, 2:59am
14
As noted on the announcement page:
https://carbide3d.com/blog/create-v8/
Create V6 files do not load into V8
so folks will need to open such files in v7:
Downloads
Moreover, as further noted:
Files from prior versions will not load 3D components in V8. There were too many changes to the internal format for the new capabilities of 3D, and there was no good way to map existing 3D components into V8.
for which see:
As noted at:
https://carbide3d.com/blog/create-v8/
from “Breaking Changes”
Files from prior versions will not load 3D components in V8. There were too many changes to the internal format for the new capabilities of 3D, and there was no good way to map existing 3D components into V8.
so v7 files will need to be converted so as to use them in v8. Fortunately, Carbide Create has a feature for exporting the 3D model as a height/depth map pixel image:
[image]
so do that to get:
[rams]
Th…
1 Like