Cribbage Board Help

[RussellF (Russell Francis)]

Dear members of the carbide 3d community,

I am looking for help making a cribbage board similar to the one in the video posted below to give as a gift. I tried doing this in the v-carve pro trial but realized it didn’t allow me to export to SVG without the full version. If you have the v-carve pro or any other software it would greatly appreciated if you could follow the tutorial and post the SVG file or even your own cribbage boards you made on this forum.

Video Link: https://www.youtube.com/watch?v=y9Hdldwuqyk&t=123s

Thank you and have a great rest of your day. Stay healthy and happy.

[WillAdams (William Adams (Carbide 3D))]

There are some links at:

https://wiki.shapeoko.com/index.php/Online_resources#Cribbage

including to:

Designing a cribbage board

A traditional design for a cribbage board is to have a top and a bottom where the lower portion hinges away from the upper to reveal storage areas for cards and pegs. Start by either finding or drawing up a board. We’ll use: [Cribbage_Board] from: https://commons.wikimedia.org/wiki/File:Cribbage_Board.svg

[RussellF (Russell Francis)]

Thank you for the help. However, does anybody have a file similar to the one shown in the video?

[LWSIV (Lester Shaw)]

This may be a good starting point for you.

McGinn's Cribbage Board

[RussellF (Russell Francis)]

If someone can close this forum that will also be greatly appreciated.