I’m trying to create some curved drawer fronts and I’m really struggling. Hoping someone can help out. The drawer fronts are, in their final form, to be 50mm tall and 400mm wide. I’m trying to get a smooth curve on the front, a curve I’d want to carry over to the frame parts too. I can see two way…

OK, so let’s make some assumptions. It’s 30mm thick stock (your example was 20) Your curve is 30mm in the center, and you used 8mm depth on the example, so we’ll go with that at the edge. When you model you need to make the stock much larger to allow the shape to develop all around the chosen vect…

Curved drawer fronts

Software Carbide Create

WillAdams (William Adams (Carbide 3D)) October 29, 2025, 8:18pm 9

For more on this sort of thing see:

1 Like