Feeds & Speeds Table

[WillAdams (William Adams (Carbide 3D))]

The Amana feeds and speeds are intended for industrial machines and may not work in ours.

I entered them (possibly inaccurately) into:

Amana tool library

Here is a .csv for the Amana tools which Carbide 3D has begun selling. Feeds and speeds are copied from similar Carbide 3D tooling for MDF and are untested: User-Amana.zip (792 Bytes) Here is a version which has the Amana feeds and speeds copied into it — breaking this up and naming it appropriately by appropriate materials and updating the feeds and speeds to match what the machine can actually cut at is left as an exercise for the reader: User_Amana_tools_Shapeoko_Various.zip (834 Bytes) A…

or

About Adding Spektra mills to tool database

Ok, thanks to @WillAdams I edited the CSV for the mills I added. Most of the columns made sense, some I guessed at. I believe things are good enough to not be afraid to try them out. If anyone is looking for something to do, I am including my mills’ specs and my CSV if you would like to opine on my interpretation… -e Amana Mills to CCPro.zip (1.0 MB)