First project gone wrong

[WillAdams (William Adams (Carbide 3D))]

You will need to manually add any tooling which is not sold by Carbide 3D.

See:

About Adding Spektra mills to tool database

Ok, thanks to @WillAdams I edited the CSV for the mills I added. Most of the columns made sense, some I guessed at. I believe things are good enough to not be afraid to try them out. If anyone is looking for something to do, I am including my mills’ specs and my CSV if you would like to opine on my interpretation… -e Amana Mills to CCPro.zip (1.0 MB)