Help setting up 3d carve

[Julien]

@RL1373

I don’t want my machine running unattended overnight

And you shouldn’t. But this recent thread should be of interest to you in that context:

Machine run time?

So, I’ve just finished the CAM for some of the batches of larger parts, and they’re going to take a while - 5 and a half hours according to Fusion. That’s for 2 parts that pretty much fill the cut volume up, 6mm thick. The router will be spinning at 10,000rpm the whole time, apart from ~1 minute intervals to change the tool and reset the z height. 4 tool changes for the drilling and small details in the first 10 minutes or so, then the same tool running constantly for the remaining time. I’ve s…