How To Setup BitSetter With Newest Carbide Motion?

[machinemoney (Chris Hayes)]

S3 XXL HDZ
This bitsetter Shapeoko BitSetter - Carbide 3D

For the initial machine setup I can choose bitsetter but it automatically moves the machine too far forward, it doesn’t let me jog to the correct location.

In the old Carbide Motion I could go into settings → Bitsetter probe checkbox → it would expand a window to allow me to select a location → click use current x/y button.

At the moment there’s a checkbox for enabling bitsetter probe but then nothing happens, there’s no ability to jog and set location.

[WillAdams (William Adams (Carbide 3D))]

Check the placement of your homing switch — it may help to shift it back if possible.

Another thing to consider is calibrating for belt stretch:

Calibrating the machines over long distances

The typical technique for machine calibration: https://my.carbide3d.com/faq/belt-stretch/ depends on precision measuring tools, and is limited by the reach of the tools in question. EDIT: It also depends on access to the MDI — if using Carbide Motion v6 it will be necessary to enable this in Settings | Options: [image] It should be possible to cut strips from a suitable blank of material, one along each axis — so we set up a square file which matches an available blank of material: [ima…

[quicky06 (Ryan Quick)]

Setting bit setter location happens on another screen from selecting the enable bit setter.

[machinemoney (Chris Hayes)]

My mistake, thanks for the help guys got it setup.