Is this even possible to make with Carbide Create?

[WillAdams (William Adams (Carbide 3D))]

That particular design was done with a laser.

You can do similar designs and then cut them using suitable toolpaths — wrote a bit about that sort of thing at:

Creating designs from elements

If one has a design idea one wants to make, usually it can be shown / mocked up as a pixel image, and put together using some basic elements. For example: [image2] All one should need for that is a portion of a U.S. flag, and the Marine Corps seal — fortunately, both are easily sourced on Wikimedia Commons: https://upload.wikimedia.org/wikipedia/commons/a/a4/Flag_of_the_United_States.svg https://upload.wikimedia.org/wikipedia/commons/b/b3/Seal_of_the_United_States_Marine_Corps.svg

Drew up the Navy insignia at:

Nvy logo svg file

Does anybody have a United Sates Navy logo that they have used to cut? I have downloaded 3 files off the internet and tried to set it up for a vcarve, and every file wants it to cut around the letters and the rope edge, etc., instead of vcarving the actual letters, rope, eagle, etc. Either I am really tired and I’m not doing something simple I’ve done on everything else, or I can’r find the right file. Any help would be appreciated. I’m trying to cut this on a piece of pine for a friend that is …