Mafell Spindle with manual tool change FM 1000 WS or PV-WS

[WillAdams (William Adams (Carbide 3D))]

Making a mounting plate for mine:

Almost got it centered, and aside from that and the two “test” holes the cut went fine — hopefully it fits as well as the acrylic test cut did.

Here’s the file — should fit to an HDZ and the Mafell FM 1000 WS:

hdzplate_adjusted_274.c2d (154.6 KB)

Here’s a slightly adjusted version based on a test fit of the file above:

hdzplate_adjusted_274_v2.c2d (123.1 KB)