Z plate bolt pattern

[WillAdams (William Adams (Carbide 3D))]

It should be the same as for the HDZ — I drew this up at:

Mafell Spindle with manual tool change FM 1000 WS or PV-WS

Making a mounting plate for mine: [WIN_20210307_21_55_21_Pro] Almost got it centered, and aside from that and the two “test” holes the cut went fine — hopefully it fits as well as the acrylic test cut did. Here’s the file — should fit to an HDZ and the Mafell FM 1000 WS: Here’s a slightly adjusted version based on a test fit of the file above: hdzplate_adjusted_274_v2.c2d (123.1 KB)

but cut a test to be sure of the fit first.