Need help finding neilferreri's post processor for V-Carve

carbide_Bill · April 22, 2020, 6:05pm

I’m having a hard time finding neilferreri’s V-carve post processor for multiple tool changes. I found this link to the file, but can’t find a way to download it. It only allows me to view the contents of the file.

github.com

neilferreri/V-Carve-PPs/blob/master/GRBL Toolchange/Shapeoko_inch_TC.pp

+================================================
+                                                
+ Grbl - Vectric machine output configuration file   
+                                                
+================================================
+                                                
+ History                                        
+                                                  
+ Who      When       What                         
+ ======== ========== ===========================
+ EdwardP  11/02/2015 Written from Grbl_mm.pp but
+                     set G20
+ EdwardP  11/02/2015 Commented out arcs as these
+                     slow GRBL performance appear 
+                     interpolated anyway
+ Mark     24/11/2015 Updated for interim 0.9 spec.
+                     Renaming to be machine specific.
+                     Removing M30 from Footer.
+ Ferreri  5/7/2018   Added G04 DWELL & M6 TOOLCHANGE
+ Ferreri  12/27/2019 Uncommented arc commands

This file has been truncated. show original

DanStory · April 22, 2020, 6:30pm

Click the “Raw” button, then File->Save (Win: Ctrl+S, Mac: Cmd+S), or right click Raw button and do “Save Link As”

carbide_Bill · April 22, 2020, 6:37pm

Thanks, Dan! That’s exactly what I was looking for!

neilferreri · April 22, 2020, 7:56pm

system · May 22, 2020, 7:56pm

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.