New roughing bits for 80mm or 65mm

[HardDrive (Jon)]

I am not advertising just throwing out props to IDC woodcraft.
I ordered the BEAST and HOG. Also a Bowl bit.
What I truly like about this company is the bits and they have a complete tool database for import with Carbide software just like Jenny. Which I also discovered today.

I had ordered the amana set but hard to find tool database for Carbide. Really not sure why AMANA would not have a tool database for carbide?
IDC-Woodcraft-Carbide-Create-Database-12-27-24.zip (8.3 KB)

[WillAdams (William Adams (Carbide 3D))]

See:

Amana tool library

Here is a .csv for the Amana tools which Carbide 3D has begun selling. Feeds and speeds are copied from similar Carbide 3D tooling for MDF and are untested: User-Amana.zip (792 Bytes) Here is a version which has the Amana feeds and speeds copied into it — breaking this up and naming it appropriately by appropriate materials and updating the feeds and speeds to match what the machine can actually cut at is left as an exercise for the reader: User_Amana_tools_Shapeoko_Various.zip (834 Bytes) A…

About Adding Spektra mills to tool database

Ok, thanks to @WillAdams I edited the CSV for the mills I added. Most of the columns made sense, some I guessed at. I believe things are good enough to not be afraid to try them out. If anyone is looking for something to do, I am including my mills’ specs and my CSV if you would like to opine on my interpretation… -e Amana Mills to CCPro.zip (1.0 MB)

[HardDrive (Jon)]

I understand what you all sell but ? Maybe I should reach out to amana and see if they would do like IDC and Jenny does for the .CSV FILE so its not so hard to import tool database or be a noobie and have no clue what to do at all.