New to cnc looking to buy

[WillAdams (William Adams (Carbide 3D))]

For the signs see:

Creating designs from elements

If one has a design idea one wants to make, usually it can be shown / mocked up as a pixel image, and put together using some basic elements. For example: [image2] All one should need for that is a portion of a U.S. flag, and the Marine Corps seal — fortunately, both are easily sourced on Wikimedia Commons: https://upload.wikimedia.org/wikipedia/commons/a/a4/Flag_of_the_United_States.svg https://upload.wikimedia.org/wikipedia/commons/b/b3/Seal_of_the_United_States_Marine_Corps.svg

What sort of cutting boards do you mean?

If glued up, then a CNC will let one cut up very small scrap pieces to make one.

Is a Noodle Board a stove cover?

https://www.toolstoday.com/t-video-how-to-make-a-stove-cover-using-your-cnc

We just discussed making rattles:

Seeking guidance on making child rattles

I’ve been making rattles for friends/families that have new babies for decades now, but doing it the old-fashioned woodworking way. I’m trying to come up with the best way to these on my Shapeoko Pro. All advice and suggestions welcome. First, the design is my wife’s: [ElephantHead] What I’ve done in the past is: Cut a piece of wood with at least one straight edge that’s big enough, trace the pattern on the face, then resaw the wood in half on my bandsaw, with the straight edge on the band…

and puzzles:

Jigsaw Puzzle Pieces

How would I go about separating the pieces of this simple jigsaw puzzle so the pieces could be cut out individually on my Shapeoko ? Attached is the CarbideCreate file. Thanks, Bill Whale 'n Whale.c2d (84.3 KB)

and there’s a section on Toys/Games at:

CutRocket