New Wasteboard With T-Track

[WillAdams (William Adams (Carbide 3D))]

Glad it’s working!

For folks who are curious about it (and are similarly cheap) see:

A different sort of filler strip

Decided I wanted a slightly more efficient usage and mounting of filler strips, so this is what I came up with: the existing strips were cut off a bit shy of the working area at a 45 degree angle, and additional holes added to secure them just short of where the angle meets the baseplate underneath the wasteboard strips were then cut at a 45 degree angle so as to fit snugly underneath at the back, and at the front to fit, and a hole with a countersink to accommodate a nylon bolt was cut in the…

As noted there, I’ll be using the PVC when it’s worked all the way down to make small boxes for tools most likely.