Shapeoko 4 XL Wasteboard hole pattern

[WillAdams (William Adams (Carbide 3D))]

I drew up the XXL ones here:

Notes on rapid positions and wasteboard leveling

We cut the holes and do the math, and send the new values for $100 and $101, then re-cut the holes to verify — with the new holes both measuring at 99.99 we call it close enough. Next, in CM move to the SW point and set XY origin there. Then we load a drawing of the hybrid T-tracks: [image] Hybrid T-track slats - XXL.c2d (110.5 KB) (it would be great if someone would measure the slats on a standard/XL size machine) and simplify and rotate it and set the stock size to match the rapid posit…

It should be pretty straight-forward to adapt that file to an XL.