E.OL.A - that’s what I was getting.
Worth noting that yesterday when I tried running it of 1.5kw VFD it wouldnt move at all. Today after connecting to 2.2kw VFD and increasing PD142 to 11A it would start to slowly spin and throw out an error code around 3-4k rpm. Also both VFDs are fully functional without cable attached to the spindle.
And I’m using those settings:
PD006=15
PD007=20
PD008=120
PD009=15
PD010=8
tbh these are the settings that I found on a cnczone and they worked perfect for me so far