Tiling feature in carbide create

[WillAdams (William Adams (Carbide 3D))]

Yes, but if you have geometry/toolpaths which pass beyond a given iteration of the cutting area that must be adjusted, see:

Tiling questions/issues

Okay, let’s imagine I want to cut out a 14" tall letter “J” on my Nomad: [image] I would start by drawing an 8" or so square which defines where there overlap is going to be: [image] I would draw in some holes for registration pins: [image] I would then duplicate and drag the registration pins and square to define the balance of what needs to be cut: [image] Then I would adjust the part I want to cut out so that it’s better placed and offset it by a bit more than the diameter of the …