Toolpath marks showing

[WillAdams (William Adams (Carbide 3D))]

Leaning into the tooling marks w/ a texture toolpath can work, or use a Facing toolpath (which goes back-and-forth per raster direction):

Project from beginning to end in CC816 and CM644

When the cut is compleat, the machine will lift, move straight back, and then to the right to return to machine origin: [WIN_20250624_20_49_25_Pro] If there is anything further which needs to be done to the part using the machine, it should be done before removing it or losing the zero position — in this case we will return to Carbide Create, select everything: [image] Offset Vectors: [image] Apply [image] and apply a texture toolpath in an effort to remove the patterning of the Pock…

Or, manually draw the side-to-side lines and then offset the geometry to limit them to the field less radius.