Vcarve file to carbide motion

[WillAdams (William Adams (Carbide 3D))]

You will need to select an appropriate post-processor — Vectric has had one for our machines since v8.5

See:

Vectric tutorial overview

Vectric makes a line of popular software products. Here is one example of a workflow to create a G-Code file using these applications. Of especial interest is Design and Make, available from: http://www.designandmake.com/ — AIUI, this application / web site was originally a 3rd party, but was purchased by Vectric. The software “Design and Make Machinist” is freely available, and will allow one to use free and purchased clipart, adjusting and repositioning it as desired, then export it into a fo…

and

How to set up the BitSetter with Vectric Products

Either edit the post-processor you are using, or get one which supports tool changes: (note that Vectric support has been sharing that file to customers who ask after this) See: Vcarve Pro and Post Processor for further details.