VFD and Control box mounting

[David_HGP (David Seiffert)]

I made my own legs, and mounted everything on the inside. I ran the cables through the back cross rail. A 3/4" hole is not going to weaken it. I also drilled 1/8" holes on the inside or the back cross rail for a few cables. You can see it on my build post.

Shapoko 5.1 Pro - Plywood Legs

I am mostly done with the legs. I still need to add some front drawers, but that might be a while. Several other projects to do. I used a single sheet of 18mm Birch Plywood. It was also my first real project, after having it for over a year. I am setting it up for PE foam production. There were a lot of other projects I needed to complete, and life got in the way. I am also done with the high volume dust collection system, and the PwnCNC 30mm spacer. I am in the process of designing a quick, h…