VFD Parameters (Huanyang model)

[gmack (Gerald Mackelburg)]

@Julien

PD156 through 162 configure the PID regulation loop:

PD156 = 100.0; Proportional § constant, in percent (0 to 1000%)
PD157 = 5.0; Integral (I) constant, in seconds (0 to 3600)
PD158 = 0.0; Differential (D) constant, in seconds (0.01 to 10)
PD159 = 0.0; PID target value: I assume that it being 0.0, disabled the PID closed-loop control.
PD160 = 0; PID target select mode, value is read from PD159
PD161 = 100; PID upper limit in %
PD162 = 0; PID lower limit in %

PD176 = 0 ; 0 = 50 Hz = inverter frequency standard; read-only

I didn’t see where PD176 gets set, how would it be set for users in the US (i.e. for 60 Hz).