Vid remote display

[HodgePodge (George)]

S5 Pro 4x4 Trials and Tribulations and Mods

After many years with a Shapeoko 3, I updated to the S5 Pro 4X4 with an 80mm 2.2Kw 220 Volt water cooled spindle. With this upgrade I made a few modifications to bring the unit to its full potential. This included a rugged stand to place the unit and a TTL control system to control the water pump, VFD, Carbide controller and vacuum. Along the path to perfection I was fought with a few problems with the machine. This included BitSetter issues, initialization failures at the top of the list . C…

Look for VFD extension kit on amazon.