What is missing from Cutrocket?

Community
1

Have you ever wanted to make something, but when you looked on Cutrocket it wasn’t there?

Please let us know and we will look into what can be done to get it created and added.

2
  1. bird houses
  2. laptop support arms
  3. monitor support arms
  4. jig to hold boards vertically for joinery
  5. finger joint boxes of standard sizes made from 1/8" -1/4" - 3/4" sheet thicknesses
  6. 3D printer stand cabinets
4 Likes
3

Quick note on your #5, I use MakerCase for my finger joint box designs. Really simple online tool.

https://en.makercase.com

2 Likes
4

Thanks!

I did #1 at:

https://cutrocket.com/p/60d26cd3a0ce0

For #2 and 3, it’s going to be hard to do better than what is commercially available (I’m cheap, and I bought one a while back and have since paired it w/ Shapeoko 5.1 Pro Monitor Mount for Leg Kit - Carbide 3D ) — that said there are already:

https://cutrocket.com/p/5ccc4c05450b8

Articulating Laptop Arm - REMIX - CutRocket

#4 is not missing either:

https://cutrocket.com/p/5cb25f3380844

https://cutrocket.com/p/5efdedf60f0f4

https://cutrocket.com/p/5ee81fa0ac121

That said, the new 5.1 Pro and Joinery Stop:

image
image1055×846 52.2 KB

are a much nicer solution.

For #5, I went over using files from the mentioned link at:

but will see about getting some of the files I’ve done uploaded in addition to files such as:

https://cutrocket.com/p/63781eaf9822f

For #6, I’ve been just placing my machines low on a small moving dolly w/ a pair of paving stones w/ some foam and a matching rubber paver, but I’ll see what can be worked up.

1 Like
5

I would like to second Marc’s numbers 2 and 3

I also wish there was a way to save a project within cutrocket. I often cruise through and see things I might like to do later but have to use my computers bookmark or save feature vs saving it within cutrocket itself. This is cumbersome as sometimes I am on a PC and other times on an ipad, so saving everything in one spot would be really helpful.

3 Likes
6

Let me know in what ways the two projects which I found which are already there don’t suit and we’ll see what can be done to improve on things.

The bookmarking/favouriting is an excellent feature suggestion — hopefully something like that will happen in a future update.

3 Likes
7

Oh, very interesting, thanks for that link.

1 Like
8

A variety of textures toolpaths.

2 Likes
9

Toolpath geometry for flattening all SP5 sizes.
That way normal CC users can surface their tables.

10

We have two out of 3:

Someone who has access to a 2x2 would need to do this — maybe @wmoy could hook us up?

1 Like