Advanced vCarve - Inlay Mode

[neilferreri (Neil Ferreri Ω)]

Inlay mode for Carbide Create

We just uploaded a new release of Carbide Create, Build 750, that include a new Inlay mode for Advanced V-carve. Normally, we’d do more internal testing, but there are so many edge cases for this that we want to get it out in public now. Get it at Carbide Create Beta Downloads This is available in both the Free and Pro version of CC. Please give it a shot and let us know how it works for you. [image] How to use it: Create a pocket for your inlay using the normal Advanced V-carve toolpath…

And, for completeness,

Creating inlays using the new Carbide Create feature

In this tutorial I’ll be showing how to use the inlay feature in the latest Carbide Create (in beta at the time of writing). I’ll try to make this tutorial as detailed and entry level as possible (lots of pictures and small steps), if you’re a more advanced user this might be too boring for you. [pic2-endresult] Before you begin Unlike most other types of cuts, you need to plan ahead a bit more for your inlay. First, the tools you need; you need a V bit as well as a 1/8" or smaller regular …