From STL file to Carbide Create (PRO) [screenshots included] (outdated, please see updated instructions in tutorial section)

[WillAdams (William Adams (Carbide 3D))]

See:

Cutting STL models with Carbide Create Pro (nearly-2021 edition)

It’s been a while since I did the previous version of this tutorial (From STL file to Carbide Create (PRO) [screenshots included]) and the various pieces of software have changed a little so I figured it’s time to do a refresher. Some of the screenshots on the forum look a little tiny, but just click on them and they should become very readable [PXL_20201127_200308347] [PXL_20201127_200343337] Step 1) Finding a good STL file Not all STL files will cut equally well on a CNC; a 3 axis CNC on…