In Need of Help

[WillAdams (William Adams (Carbide 3D))]

For stacked text see:

Could use some guidance on creating a carve

To do this using the Advanced V carve features it’s much the same, just a bit simpler: Set the texts and duplicate them and set the duplicates aside in case a reference is needed: [image] draw up the V carving geometry in profile to see how things will cut: [image] and offset the top geometry by that distance: [image] [image] Boolean union w/ the outside geometry for the lower layer: [image] [image] Where geometry has been lost, bring back the geometry which was used by repeatin…

If you get stuck on a file, post here or to support@carbide3d.com and we’ll work through it w/ you.