Initial set up shapeko 4 xxl

[Dennis14 (Dennis Irish)]

I have loaded the motion software newest version originally would not say on 4xxl and defaulted to 3xl, now does not even show 4xxl as option

[WillAdams (William Adams (Carbide 3D))]

Please see:

Carbide Motion 548

This version was just posted to beta, and the screens in it are sufficiently different that I thought it might be useful to have them here w/ some comments for reference: [Screen Shot 2021-12-31 at 3.53.12 PM] [Screen Shot 2021-12-31 at 3.53.51 PM] [Screen Shot 2021-12-31 at 3.54.13 PM]

which shows the different screens/pop-ups which includes a combination for the Shapeoko 4 in the XXL size:

Carbide Motion 548

In the Settings pane one can set the Machine Configuration. This is done in two stages: Travel Dimensions: [Screen Shot 2021-12-31 at 4.50.39 PM] which has the options: [Screen Shot 2021-12-31 at 4.56.08 PM] and GRBL Configuration: [Screen Shot 2021-12-31 at 4.57.02 PM] which has the options: [Screen Shot 2021-12-31 at 4.57.29 PM]

[Dennis14 (Dennis Irish)]

Thank you I will try again