Bit Zero with 60 Deg Vee bit

[WillAdams (William Adams (Carbide 3D))]

Using a V tool for the zero at Center works well when setting the zero visually as shown at:

Making a guitar bridge for Carbide Create Pro

as requested on support… Given a file in Carbide Create which describes a guitar bridge: [image] there are a couple of different ways which this part could be made: draw up contour geometry and assign toolpaths to appropriate depths (note that this does not require Carbide Create Pro): Spoon Possible without CC Pro? model the design in a traditional CAD tool, export it as an STL and then import that STL into Carbide Create Pro and then cut that 3D model using Carbide Create Pro: Instru…

It’s not a good idea when setting the origin for X and/or Y with a BitZero due to tool rotation changing the results (which is why using a probing pin is recommended).