WillAdams
(William Adams (Carbide 3D))
March 22, 2025, 10:14am
4
We have a bit here on luthiery:
as requested on support…
Given a guitar body design as an STL:
[image]
and a DXF:
[image]
We import each:
[image]
[image]
and look into how the imported geometry and 3D model work out for making toolpaths.
as requested on support…
Given a file in Carbide Create which describes a guitar bridge:
[image]
there are a couple of different ways which this part could be made:
draw up contour geometry and assign toolpaths to appropriate depths (note that this does not require Carbide Create Pro): Spoon Possible without CC Pro?
model the design in a traditional CAD tool, export it as an STL and then import that STL into Carbide Create Pro and then cut that 3D model using Carbide Create Pro: Instru…
and a search will yield more…
but it’s a tough row to hoe and for v8 at least, it doesn’t seem likely one could do an entire guitar in 3D in a reasonable fashion with the current UI — the neck at least thus far folks have been modeling in a 3rd part tool such as Alibre:
and then importing as a 3D STL.
1 Like