Half a Cylinder

[WillAdams (William Adams (Carbide 3D))]

You would need to have Carbide Create Pro for this, unless you want to set up the toolpaths and geometry as shown at:

Spoon Possible without CC Pro?

I’d like to make a wooden spoon and was wondering if that’s possible to do with the standard CC? Can it be done with a bowl bit? I don’t have one but can pick one up. Thanks!

Or, you could use a 3rd party tool for 3D modeling, make an STL, and then import that:

Making a guitar bridge for Carbide Create Pro

as requested on support… Given a file in Carbide Create which describes a guitar bridge: [image] there are a couple of different ways which this part could be made: draw up contour geometry and assign toolpaths to appropriate depths (note that this does not require Carbide Create Pro): Spoon Possible without CC Pro? model the design in a traditional CAD tool, export it as an STL and then import that STL into Carbide Create Pro and then cut that 3D model using Carbide Create Pro: Instru…

If you’ll let us know the dimensions you need we can walk through this with you.