Coin tray with curved bottom

[WillAdams (William Adams (Carbide 3D))]

Do you have Carbide Create Pro?

See:

Semi Circle Cigar Rest

I’ve looked around with no luck in finding a way to design a semi circle cigar rest into my cigar ashtray designs. On other projects I’ve done I’ve used a Forstner bit but I’m looking to develop the skill rather than buying the file and making someone else’s idea. I’d like to use the 3D feature in Pro rather than just creating a toolpath for a cove bit. I believe its a simple thing, I just need to learn to do it for myself. Anyone willing to pass on their knowlege?

Trying to create a slope profile, whats the easiest way

I’m trying to create a rectangle with a slope on it. Probably 5-10 degrees. Pro used to do this easily with the “Angle” option, but now I only get a pyramid when using angle. Anyone have some good tips?

For using a 3rd party program, see:

Poker Chip Tray with angled pockets for Carbide Create Pro

This came up from a recent discussion here: Trying to create a slope profile, whats the easiest way - Software / Carbide Create - Carbide 3D Community Site and resulted in making: https://www.blockscad3d.com/community/projects/1736033 which link if clicked on will bring up: [image] If one then clicks on: [image] It will bring up an editing interface: [image] Which is parametric — there are values for: Height Depth Spacing and Perimeter Number of Pockets Chip Diameter and if one cli…

Or, you can just do ball-nose tools and No Offset Contour toolpaths:

Spoon Possible without CC Pro?

I’d like to make a wooden spoon and was wondering if that’s possible to do with the standard CC? Can it be done with a bowl bit? I don’t have one but can pick one up. Thanks!

Making a base for a model

Given a prototype base: [image] How to make it in Carbide Create? First, we have a pixel image with some dimensions: [F-86 base scan with measurements] We import that into Carbide Create: [image] using “Set Background”: [image] and adjust for size: [image] [image] It’s then a matter of drawing and toolpaths and so forth (we will try to do it w/o Create Pro, but will also show that). For reference, there is an overhead view as well: [DSC00036]